Pay in installments of $6.80 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jun 30 - Jul 5
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
gravel bike bar end shifters Bar End Shifter Mount – TerraCycle, IncEver wanted to attach a computer, GPS, motor controller, or phone right near your hands? Ever wanted to attach something like a mirror to the ends your handlebars, but you have Bar End Shifters, so there wasn't any way to do it? Well, now there is! This mount uses a special clamp with a Cable Tunnel in it that attaches to the end of your handlebars right under your Bar End Shifters. The clamp extends forward and inward a little bit, and holds the T
Ever wanted to attach a computer, GPS, motor controller, or phone right near your hands? Ever wanted to attach something like a mirror to the ends your handlebars, but you have Bar End Shifters, so there wasn't any way to do it? Well, now there is! This mount uses a special clamp with a Cable Tunnel in it that attaches to the end of your handlebars right under your Bar End Shifters. The clamp extends forward and inward a little bit, and holds the T-shaped mounting tube that goes up and over. Since the clamp goes inward a little bit, your hands slide right past it. You'll barely notice it's there as you go from braking to shifting and back. What you will notice is that your mirror is now right where you want it to be, and that you can easily see your phone and operate the buttons on your motor controller. It can be installed on the right or left side of the trike.
FAQ
1. What does this mount do?
A lot of trikers would like to mount accessories near their hands. When you have Bar End Shifters, the ends of the handlebars are full and there's no place to put things. This mount solves that by providing a clamp with a notch in it to go around the shifter cable. We make two versions, one for when the cable is in the front, and one for when the cable is in the back.
Since your hands need to move up and down from the brakes to the shifters and back, the clamp is angled and specially shaped to stay out of the way. It's curved and doesn't have any sharp corners, so as your fingers brush past it, you'll hardly notice it's there. The L shaped tubular mount goes up and out, putting an adjustable height horizontal tube about 2 inches (50mm) above and in front of the shifters. It works on both the left and right sides by simply flipping the components around.
2. What can I put on it?
All sorts of things- mirrors, computers, phones, GPSs, motor controllers, etc. Anything you want close at hand.
3. Can I use it as a hand rest?
Yes, it's strong enough to rest your hands for a while as you ride, but we don't recommend you use it to actively steer your trike. It's designed to be a lightweight accessory mount, not a handlebar extension.
4. Can I use it as an exit assist?
Unfortunately, no. The handlebars themselves are often not strong enough, and the clamp is designed to be small and light and it's not strong enough to hold that much weight. We make actual exit assists as well, they are made very differently.
5. How hard is it to install?
Not hard at all. You don't have to decable the shifter, but you do have to move it up temporarily.
INSTALLATION INSTRUCTIONS
Installation is straightforward but does involve popping the bar end shifter out temporarily. If you are unfamiliar with shifters or are uncomfortable taking things apart, we recommend finding someone to help you that's done things like this before. It's not hard, but there are some details you want to pay attention to. Installation goes like this: release the handlebar clamp inside the shifter, pull the shifter up, slide the clamp arm over the cable housing, push the clamp onto the end of the handlebar, and put the shifter back the way it was. Here are the detailed steps to install:
- While pedaling, shift into the gear where the lever is vertical. Then, without pedaling, shift so the lever is horizontal. This puts slack in the cable, which makes the shifter easier to take apart.
- Examine the shifter. One side of it rotates with the shifter arm, and the other side does not. There will be two bolts, one on each side. Remove the bolt from the fixed (non shifter arm) side.
- Swing the shift lever aside. You should now be able to see down inside the handlebar to the clamp that holds the shifter in place. Loosen the clamp bolt 1 (one!) turn. This should be enough to release the clamp. You don't want to overloosen the clamp as the parts may fall down inside the handlebar. Just barely loose is all you need.
- Gently pull the shifter base up out of the handlebar. The handlebar grip will be gripping the cable housing, but a slow steady pull will allow you to pull it up enough to get it out. Once it's out, there's no need to pull it any further.
- There are two pinch bolts in the new clamp. They cross the long curved slot in the clamp. The cable housing needs to slide through that slot, so temporarily remove the bolts.
- Orient the clamp so the open end will point slightly inward towards the middle of the trike when the clamp is on the end of the handlebar. With the clamp in that orientation, slide the cable housing through the slot in the clamp, all the way to the inside where the cable tunnel is.
- Push the cable housing in to the tunnel and push the clamp down onto the end of the handlebar. Most handlebar grips will happily push down the 1/2 inch (12.7mm) that the clamp requires. Push the clamp down until the end of the handlebar is flush with the top of the clamp. Reinstall the clamp bolts and lightly clamp it to the handlebar while you reinstall the shifter.
- Put the shifter clamp back into the end of the handlebar, and while gently pulling on the shifter cable, push the shifter base back into the handlebar until it seats. Align the shifter base so the swing of the shifter arm is where you want it and tighten the clamp bolt down inside the handlebar.
- Put the shifter arm back on the base. There is usually a square or D shaped protrusion on the arm that needs to go back into a corresponding pocket on the side of the base. Rotate the arm and snap it into the pocket. Reinstall the bolt that holds the arm to the base. Pull the shifter arm back to vertical to retension the cable.
- Loosen the bolts on the new clamp and install the L arm. Adjust the height and angle of the arm and the clamp, then tighten the clamp bolts. Once they take tension, tighten them alternately until they are both medium tight.
ADDITIONAL INFO
- Machined from 6061T6 aluminum, anodized black. Fasteners are stainless steel. Clamp attaches the end of your 7/8 handlebar and has a tunnel that goes around the shifter cable. The L shaped Accessory Mounting tube provided is black powder coated 7/8 diameter 6061T4 tube.
- There are two versions of the clamp part of this mount. One has the cable tunnel on the front (most trikes, like Catrike, TerraTrike, HPVT, Azub, Performer, etc.), and the other has the cable tunnel on the back (ICE trikes assembled in the UK).
- The clamp is designed to be installed without needing to decable the shifter. Once you've done one, you can install one in about 2 minutes. It's one of those things that's more work to explain than to do.
- The clamp is designed to clamp around a painted or anodized 7/8 inch (22.2mm) handlebar tube. Only 1/2 inch (12.7mm) of handlebar space is required. The width of the cable tunnel allows about 10 degrees of side to side angular adjustment.
- The T shaped Accessory Mounting Tube is also 7/8 inch in diameter and has a total height of about 5 inches (127mm). The Accessory Mounting tube is adjustable up and down and radially.
- This mount is designed to hold accessories like mirrors, phones, GPSs, and motor controllers. It is not designed for heavy loads or to carry steering forces.
- Fits any bike or trike with bar end shifters where you'd like to mount other things near the end of the handlebars.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 1704 reviews
Sort
Product Reviews
★★★★★ 5
super smooth, silky, stays comfortable feeling. DO NOT DRY or wash with heat
Color: Blue, Size: Queen (U.S. Standard), Set name: Stretchy and Soft, Color: Blue, Size: Queen (U.S. Standard), Set name: Stretchy and Soft
I'm impressed. I have used cooling pillow cases before, and found them effective, but the cooling material have always been on just one side. These are 100% cooling material. The material is super smooth and silky feeling. It is great feeling against hair and skin (even better than my old polyester satin I was using before cooling pillowcases). The material is cool, and does not seem to get hot hot. The pillow cases are super stretchy with a small hidden zipper. They grab onto the pillow and dont loosen up. Makes my pillow look neat and clean, not sloppy from loose material. I can even have two pillows stacked and somehow despite being a smooth material, the pillows dont just slide off each other.
The cooling aspect works by not trapping heat, not allowing heat to get to the pillow and hold it there. So yeh, the pillow case will feel warm eventually but if you have a fan, or AC, or flip the pillow, then it is is truly cool. Otherwise in my experience when I use a pillow without this, the pillow just gets hot, stays hot, and even with flipping it feels hot.. because the pillow itself has trapped the heat for remainder of night. Yuck.
One thing to know and this is very important-- as I learned the hard way-- DO NOT DRY IN DRYER. DO NOT WASH IN HOT WATER. Heat will destroy the material ability to feel and stay cool. Do you want a regular heat trapping pillow case? Then go ahead and dry these in the dryer a few times and you will have a regular pillow case. HOw do I know? I bought these to replace another set (different brand, same idea, same instructions that I failed to remember). I always dried them in the dryer, and one night after having gloriously cool pillows, I noticed that my pillow was HOT night after night. It was then when looking for another set of pillow cases that I learned that they cant be exposed to heat like that. SO PLEASE, just AIR DRY.
And so, after I got these and put them on my pillows, I had a much better nights rest. I remember thinking that I wasnt waking to rearrange my pillows. They were just comfortable all night long. Sure, I'd love an even colder pillow, but our room is on the warm side. But at least I wasnt noting the hot hot pillows anymore.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 6, 2021
★★★★★ 5
A must try for hot sleepers!
Color: Blue, Size: Queen (U.S. Standard), Set name: Silky, Color: Blue, Size: Queen (U.S. Standard), Set name: Silky
If you are a hot sleeper these pillowcases are for you! Not only are they silky and beautiful, but they are cool to the touch!The Arc-Chill fabric absorbs heat and instantly cools your skin! If you are prone to insomnia, night sweats, give these a try! They come in a 2 pack and have a few different colors to try out. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Freezing !
Color: Gray, Size: Queen (U.S. Standard), Set name: Stretchy and Soft
### Product Review: Avolare 2 Pack Cooling Pillow Cases
#### Overview
The Avolare 2 Pack Cooling Pillow Cases are designed to provide a cooler and more comfortable sleeping experience, especially for hot sleepers. Made with Arc-Chill fabric, these pillowcases promise to offer a cooling effect, protect hair and skin, and add a touch of luxury with their soft and silky texture. The pillowcases come in a standard gray color, suitable for standard and queen-size pillows.
#### Material and Design
**Rating: ★★★★★**
The Avolare Cooling Pillow Cases are crafted from Arc-Chill fabric, known for its high Q-max value (>0.5), indicating excellent cooling properties. The material feels incredibly soft and silky to the touch, providing a luxurious feel that enhances sleep quality. The gray color is neutral and versatile, fitting seamlessly with various bedding styles.
The design includes a hidden zipper, ensuring that the pillowcase stays securely on the pillow while maintaining a smooth and sleek appearance. The zipper is discreet and doesn’t interfere with comfort, which is a thoughtful addition to the overall design.
#### Cooling Effect
**Rating: ★★★★★**
One of the standout features of these pillowcases is their cooling effect. The Arc-Chill fabric effectively wicks away heat and moisture, making them ideal for hot sleepers or those living in warmer climates. Users have reported a noticeable difference in temperature, which contributes to a more restful and comfortable night’s sleep. This cooling property is particularly beneficial during the summer months or for individuals who tend to overheat while sleeping.
#### Hair and Skin Benefits
**Rating: ★★★★☆**
In addition to their cooling properties, the Avolare pillowcases are also beneficial for hair and skin. The smooth and silky texture reduces friction, helping to prevent hair breakage and skin irritation. This can be particularly advantageous for individuals with sensitive skin or those prone to hair damage. While the pillowcases are not a cure-all for skin and hair issues, they do contribute positively by creating a gentler surface.
#### Durability and Care
**Rating: ★★★★☆**
The Avolare Cooling Pillow Cases are easy to care for, maintaining their cooling properties and softness even after multiple washes. They are machine washable, which adds to their convenience. However, it is recommended to follow the care instructions carefully to ensure the longevity of the cooling effect and fabric quality.
#### Versatility
**Rating: ★★★★☆**
These pillowcases are designed to fit both standard and queen-size pillows, adding to their versatility. They are perfect for use in any bedroom setting, from master bedrooms to guest rooms, and can be paired with various pillow types and fillings.
#### Pros and Cons
**Pros:**
- Excellent cooling properties ideal for hot sleepers.
- Soft and silky texture is gentle on hair and skin.
- Hidden zipper design for a secure fit.
- Machine washable and easy to care for.
- Versatile fit for standard and queen-size pillows.
**Cons:**
- Cooling effect may diminish slightly with frequent washing.
- Limited color options (only available in gray).
#### Final Verdict
**Overall Rating: ★★★★☆**
The Avolare 2 Pack Cooling Pillow Cases are an excellent choice for anyone looking to enhance their sleeping experience, particularly hot sleepers. The cooling properties of the Arc-Chill fabric, combined with the soft and silky texture, provide a comfortable and luxurious feel. The hidden zipper design adds practicality without sacrificing aesthetics.
While there are minor drawbacks, such as potential diminishing of the cooling effect with frequent washing and limited color options, the overall benefits make these pillowcases a worthwhile investment. If you’re seeking to improve your sleep quality and enjoy a cooler, more comfortable night’s rest, the Avolare Cooling Pillow Cases are definitely worth considering.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2024
★★★★★ 4
Cool as the other side of the pillow
Color: Gray, Size: Queen (U.S. Standard), Set name: Stretchy and Soft
Good quality and keeps cool on side of pillow. Have to flip pillow for constant cooling is the ok only down side. Love the material as it is very soft and silky feel to it. Doesn't wrinkle over pillow and had some good color options. Easy to clean. Fair price for a good product
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 11, 2026
★★★★★ 5
Love!
Color: Blue, Size: Queen (U.S. Standard), Set name: Stretchy and Soft
Awesome cases! They really are cool to the touch. I didn’t sleep hot at all. I have a “cut-out” memory foam pillow, and this stretched around it perfectly. It is flexible enough that it doesn’t impede with the cut out. And while the material is “silky,” it doesn’t slide around the pillow while sleeping on it. The zipper feature is perfect. I washed and dried per the tag instructions and they washed very well. Super happy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 8, 2026